reflective solar road sutd
Reflective solar road sutds on motorway can be used on motorway or other roads to mark the centerline, lane line and edge line; it can also be used to mark the curve, ramp entrance, guide line, narrow roads, road obstructions in dangerous sections with very strong traffic safety warning function.
Feature of reflective solar road sutd
1. Easy installed. Don’t have external power source and external lines.
2. LED indicators are mounted in one side or double side according to customers’ requirement.
3. Energy saving, low power consumption, used solar power, low cost.
4. High warning effect, used wafer chip from Taiwan, active luminous, high luminance, dynamic warning.
5. Stable property, designed by integrated circuit and thermostability rechargeable batteries. Ensure the long servicing life and performance of the product.
6. The road stud is applicable to pavement, roadside edge, kerb stone, port and so on.
How to install:
1.Mix the glue.
2.Positioning: solar road stud install place must to be flat, dry, clean,seamless.
3.Stick with glue:using the proper quantity glue,sticked on the ground firm ,after installation, please turn the road stud left and right once again to ensure the road studs paste on the road uniform.
4.Road closures:Must be 6 hours of road closures to ensure the glue curing time.
Our road sutds meet CE & RoHS standard and well received by our domestic clients and abroad clients fron Australia, Slovakia, France,UK, Argentina, Romania, Indonesia, Middle East and Africa.
 |
| Reflective Solar Road Sutd |
Feature of reflective solar road sutd
1. Easy installed. Don’t have external power source and external lines.
2. LED indicators are mounted in one side or double side according to customers’ requirement.
3. Energy saving, low power consumption, used solar power, low cost.
4. High warning effect, used wafer chip from Taiwan, active luminous, high luminance, dynamic warning.
5. Stable property, designed by integrated circuit and thermostability rechargeable batteries. Ensure the long servicing life and performance of the product.
6. The road stud is applicable to pavement, roadside edge, kerb stone, port and so on.
How to install:
1.Mix the glue.
2.Positioning: solar road stud install place must to be flat, dry, clean,seamless.
3.Stick with glue:using the proper quantity glue,sticked on the ground firm ,after installation, please turn the road stud left and right once again to ensure the road studs paste on the road uniform.
4.Road closures:Must be 6 hours of road closures to ensure the glue curing time.
Our road sutds meet CE & RoHS standard and well received by our domestic clients and abroad clients fron Australia, Slovakia, France,UK, Argentina, Romania, Indonesia, Middle East and Africa.
评论
发表评论